Question: How do I date Celestion?

Since 1956, all Celestion chassis drivers have been stamped with a date code (two numbers and two letters), denoting exact date of manufacture. The codes are added on the production line and are placed on the speakers chassis leg, on the front gasket or, in more recent times, on a label on the magnet edge.

How do you read a speaker code?

The first 3 digits on a pot, or the first 2, 3 or 4 digits on a speaker are the source or manufacturer code. The remaining 3 or 4 digits are the date code. In 3 digit dates code, the 1st digit is the last digit of the year. On 4 digits date codes, the 1st and 2nd digits are the last two digits of the year.

How do you date a Fender speaker?

All Fender amplifiers manufactured from 1990 until now, have a date code printed on the quality assurance (QA) sticker on the rear of the chassis. This black-silver sticker shows signatures or initials of employees after the finished noise and electrical tests.

What is a speaker code?

Speaker Codes And What They Mean The 6 digit code indicates what manufacturer made the speaker and when it was made. It is called the Manufacture Date Code. In later years, the EIA converted to a 4 digit date code so the year could be easily identified.

What happened to Celestion speakers?

In 2006 Celestion ceased to manufacture finished professional audio systems and consumer hi-fi / home cinema products, and now focuses on the design and manufacture of lead guitar, bass guitar, professional audio and sound reinforcement speakers.

How do you date a Fender Bassman head?

All Fender amplifiers manufactured from 1990 – present include a date code printed on the quality assurance (QA) sticker on the back of the amp chassis, and are dated the by the first letter as the year and the second letter as the month.

How do you date a Fender transformer?

TRANSFORMER DATE CODES: The date is in the last three digits, after the 606 – . The first of the three digits tells us the last digit of the year (unfortunately not decade specific) and the last two numbers tell us the week. In the above example, the transformer was made in either 1966 or 1976, week 45.

How do you date a Bassman?

The only sure-fire way to date a Fender Bassman is by matching serial schemes. Find the tube chart located in the back of your amplifier. The tube chart is a diagram detailing what kind of tubes are installed in your amplifier. It will usually be printed on a 4- by 4-inch sticker placed near the tubes in your amp.

Are Jensen Speakers good?

Sounds very good in both. I currently own all of the Jensen Alnico Speakers (P12R in a Vox AC15, P12Q in an extension cabinet and a P12N in a Fender Blues Deluxe) and they all are quality speakers. These speakers sound a lot better than your average ceramic by far. Detailed sound response.

How do you date a Fender Bassman?

All Fender amplifiers manufactured from 1990 – present include a date code printed on the quality assurance (QA) sticker on the back of the amp chassis, and are dated the by the first letter as the year and the second letter as the month.

Who used a 59 Bassman?

Josh Homme even had one in his Them Crooked Vultures backline. The Bassman has become so synonymous with the six-string fraternity that when Fender reissued the ´59 4x10 model in 1990, it finally took the hint and changed its designation from bass to guitar amplifier.

Who uses Fender Bassman?

Hendrix was rumoured to have used a Bassman in the studio, while Kurt Cobain definitely ran his Mustangs and Jags through one during the recording of Nirvana´s Nevermind in 1991. Josh Homme even had one in his Them Crooked Vultures backline.

Write us

Find us at the office

Diltz- Kenepp street no. 62, 60856 Banjul, Gambia

Give us a ring

Angell Hurray
+68 189 906 994
Mon - Fri, 11:00-21:00

Reach out